Catena WDLS 80
The Catena Washer, Dryer, Light-Finisher and Stacker
- Max Plate size
1320x2032mm /52×80″Min Plate size 400x400mm/16x16''
- Max Plate thickness
7mm/0.276”Min Plate thickness 0.76mm/0.03''
380V 3ø N+PE 50/60Hz 32A
- Compressed air
Average 50l / min
Peak 250l / min (10 seconds)
7817kg / 17197lbs
Contact us today!
WASHER SECTION - Automatic Pinbar
Plate punching is not required. A cleverly designed pinbar system transports the plate flawlessly through the washing process and returns for the next plate, no need for manual transportation of the pinbars. Three pinbars ensure continuous availability. Only an edge of 8 mm plate material is required to pull the plate through the wash-out unit (other systems typically need 20 mm). The pin-bar is returned without travelling through the dryer, saving a great deal of maintenance as any polymer residue isn’t baked on and simply disappears.
WASHER SECTION - Closed Operation
A sealed environment with efficient extraction ensures minimum solvent fumes in the working area, even when opening the doors a minimum of solvent smell will be perceived as the solvent section is completely enclosed.
WASHER SECTION - Highest Productivity with plate Alignment
Unique plate alignment when loading the plate into the Catena-W avoids plate skew during transport. The advanced plate queuing, limiting the distance between plates to 50 cm, maximizes throughput for the highest possible productivity. At the end of the wash-out process the plate feeds directly into the DLS section.
DRYER, LIGHT-FINISHER & STACKER SECTION
- 7 stacking positions
- 10 dryer units
- UVA+UVC light-finishing section
DRYER, LIGHT-FINISHER & STACKER SECTION - Robotised Plate Movement
After washing, plate control is taken over by the DLS section. Robotised movement manoeuvres the plate through drying and light-finishing. As well as storage positions for finished plates, the stacker can act as a ‘rest’ position to ensure that plates are properly cooled after drying before being light-finished.
DRYER, LIGHT-FINISHER & STACKER SECTION - Individually Controlled Dryer Sections
Independent heaters, sensor control and ventilation for all 7 dryer sections. This ensures exact temperature and timings for all plates. Only required sections need to be active for economic operation if only a few sections are required.
DRYER, LIGHT-FINISHER & STACKER SECTION - Precision Light Finishing
UVA and UVC lamps are monitored and controlled to ensure ultimate consistency from plate to plate. Sensors test intensity between each plate and monitored to ensure timely replacement when necessary. A record of lamp performance can be available for every plate for ultimate QC tracking.
Robotised movement loads and unloads plates from the dryer sections into the light-finisher, with a rest in the stacker to cool before post-exposures. Finished plates are automatically unloaded from the light-finisher into the stacker after exposures, ready for collection.
ThermoFlexX GUI & Smart Comms
All ThermoFlexX equipment utilises leading brand PC’s, monitors and the latest Windows OS aimed specifically at high-end system development. ThermoFlexX Graphic User Interface is displayed via a Full HD touch-screen making operation extremely fast and simple. Key information is clearly presented to the operator for ease-of-operation without errors.
ThermoFlexX Smart Communication
Smart Comms between imagers and Catena modules gives an even higher level of set-up automation and further speeds up plate production.
All critical information such as motor current, controllers, operating conditions and working temperatures are monitored. This information can be stored and made available for total plate QC records.
ThermoFlexX ProServeX provides a cloud-based, constant monitoring service of all key components throughout the range. A brand-new level of predictive maintenance with on-line support is available. The need for physical service-interventions is minimised.
Catena Cockpit provides a highly visible status report, via ‘airport style’ screens, showing all plates, their progress and expected time of completion.